WPC Doors Wholesalers

How To Maintain The Interior WPC Door?

To maintain interior WPC doors, follow these guidelines:

Regular cleaning: Use a soft cloth or sponge and a mild detergent to clean the surface of the interior WPC door. Avoid using abrasive cleaners or scrub brushes that may cause scratches.

Avoid excessive moisture: WPC doors are moisture-resistant but not completely waterproof. Wipe off any spills or moisture immediately to prevent swelling or warping of the door.

Protect from direct sunlight: Prolonged exposure to direct sunlight can fade the color of WPC doors. Consider using curtains or blinds to minimize sun exposure and prevent discoloration.

Prevent scratches: Place doormats or rugs near the entrance to prevent dirt and debris from scratching the surface of the door. Avoid using sharp objects or abrasive materials that may damage the WPC surface.

Regular inspections: Periodically check the hinges, handles, and other hardware of the interior WPC door for any signs of wear or damage. Lubricate the hinges if necessary and tighten any loose screws.

Avoid harsh chemicals: Do not use harsh chemicals, solvents, or abrasive cleaners on WPC doors as they can damage the surface finish. Stick to mild, non-abrasive cleaning agents.

By following these maintenance practices, you can keep your interior WPC doors in good condition, ensuring their longevity and aesthetic appeal.

What Are The Production Processes Of Wood Plastic Door?

The production processes of wood plastic doors typically involve the following steps:

Material preparation: Wood plastic doors are made from a combination of wood fibers or sawdust and thermoplastic polymers, such as polyvinyl chloride (PVC) or polyethylene (PE). The wood fibers are first dried and mixed with the plastic resin to create a homogeneous mixture.

Mixing and extrusion: The prepared mixture is fed into an extruder, where it undergoes high-temperature mixing and melting. This process helps distribute the wood fibers evenly throughout the plastic matrix, ensuring a consistent material composition.

Shaping: The molten mixture is then passed through a shaping die, which gives it the desired profile and dimensions of the door. The extruded material is typically in the form of a continuous sheet or a hollow section, depending on the door design.

Cooling and cutting: After shaping, the extruded material is cooled rapidly to solidify it. This can be achieved using water baths or air cooling systems. Once cooled, the continuous sheet or hollow section is cut into individual door blanks of the required length.

Surface treatment: The door blanks undergo surface treatment processes to enhance their appearance and durability. This may involve techniques such as sanding, embossing, or laminating with decorative films to simulate wood grain patterns.

Assembly and finishing: The door blanks are further processed to add components like hinges, handles, and locks. The doors are assembled and undergo quality checks to ensure proper functionality. Finishing touches, such as painting or staining, can be applied to enhance the door's aesthetics and protect it from environmental factors.

Quality control and packaging: Before being packaged and shipped, wood plastic doors undergo rigorous quality control inspections to ensure they meet the required standards and specifications. Packaging methods may vary, but typically doors are carefully wrapped and protected to prevent damage during transportation.

By following these production processes, manufacturers can produce wood plastic doors that offer a combination of wood-like aesthetics and the benefits of plastic, such as durability, moisture resistance, and ease of maintenance.